Products for Rodding

Thanks to many years of experience combined with process knowledge Storvik offers project deliveries, machinery, maintenance, and modification services. 

Quality of each operation in Anode service shop, often called Rodding is crucial for successful result in the electrolysis. In Rodding shop residuals after electrolysis as bath, butts, and iron collar are removed prior to start cleaning of the stubs at the anode hangers. The cleaning of the surface will avoid mixing of frozen electrolyte and molten iron used to seal the stubs to the carbon anode.  

Storvik has developed and delivered equipment and machinery for these operations throughout many years such as: 

  • Bath Removal Mill  
  • Bath removal Pusher 
  • Anode stub cleaner 
  • Automatic stacking of anodes 
  • Bath crusher overhead conveyor  
  • Roller and belt conveyors 
  • Dust removal systems 
  • Handling equipment like tools and grabs 

All equipment mentioned above is fully automatic controlled. 

Recent deliveries include the fully automatic Inline Rod Repair. Surveillance of Anode hanger rods (stubs) are analysed by a diagnostic vision system, and anode hangers with rejected rods are automatically transferred for cutting and robotized welding of new rods prior to new cycle in electrolysis. 

3D Technical animations Storvik

Anode Stub Cleaner

Storvik Anode stub cleaner performs cleaning of anode stubs and yoke in the anode service shop prior to rodding or eventually repair of stubs. Specially the stubs are heavily contaminated by fouling of electrolytic bath 

The stubs need thorough cleaning prior to welding of stubs as well as rodding for a new cycle in electrolysis. Fouling of bath influence on welding process in eventual repair and reduces electric conductivity. This results in voltage drop and reduced productions in the electrolysis. 

Compared with sandblasting the dust and noise impact will be reduced and contributes to an improved HSE. 

The Storvik Anode stub cleaner is a favourable alternative to sandblasting due to reduced operational and investment costs, i.e. reduced OPEX and CAPEX. 

Anode stub cleaner Storvik

Bath Removal Mill

The Storvik Bath removal Mill removes the fouling of electrolytic bath sticking to the top of the butts (remains of anode not utilised in electrolysis). The removal of bath by milling is continuous process and performed while the butts is passing through the machine. The anode hanger and butts is attached to overhead conveyor 

By doing this prior to final removal of the butts results in a cleaner carbon fraction which normally will be recycled 

See chapter regarding Bath Removal Pusher for further improvement of this operations by another Storvik delivery.

BATH REMOVAL MILL STORVIK

Inline Rod Repair

The Storvik Inline Rod Repair line performs repair of anode Rod (stubs) automatically in anode service shopAs indicated the setup is arranged in line with the main overhead conveyor system and performs complete unmanned repair 

It starts with a Vision system observing quality of each single rod (stub) following some predetermined criteria and decide the need for repairThis is done prior to a new cycle and all anode hangers inside the acceptance criteria will continue along the main conveyor line.  

The repair is done in an integrated local loop starting with cutting (bandsaw) of the rejected rod and following repair by weldingOne robot picks up and arrange in position a new rod while two welding robots preforms the welding operation 

After repair, the anode hangers are returned to the main overhead conveyor for rodding. 

Quality of repair is high and reliableFurthermore, we have recognised big achievement is reduction of labour-intensive operations and manual handling. The HSE is significantly improved, and the quantity of anode hangers out of service is reduced drastically.

Bath Removal Pusher

The Storvik Bath Removal Pusher removes fouling of electrolytic bath from top of the butts (= remains of anode not fully utilised in electrolysis) which the longitudinal milling process could not reach.

The Bath removal Pusher performs a transversal operation as the Bath Removal Mill do it longitudinal.
The Bath removal Pusher removes the electrolytic bath by hydraulic operated devices while the anode hanger with butts is passing through the machine. This is performed when the anode hanger is stopped in a fixed position for a short time.

Those two machines together remove bath from the whole top of the butts which results in a cleaner carbon fraction for recycling.
For Bath Removal Mill see other description.

BATH REMOVAL PUSHER STORVIK

Industriveien 13, N-6600 Sunndalsøra